DOUBLE TIER KNIFE STAND for Large Knives FX OMEX2
This handsome display stand fits two bowie or other large knives. Cherry laminated finish with satin black accented edges on base and posts. The base measures 10-1/8 inches long, 3-1/8 inches wide, and 7/16 inches thick. Distance between posts (from insides surface to opposite inside surface) measures 5-1/4 inches. The lower tier is designed to support knife with two wooden dowels positioned 2-1/4 inches up each post. Both stock and blade posts are cut to project vertically at approx 80 degrees in relation to the base. This insures there is no wobble room for knifes in the lower tier position and also allows both knives to display in a visually appealing tilt. The blade post is cut with a blade slot and the stock post top is cut concave to prevent slippage. Posts come detached from base and the stand is easily assembled with the two screws provided. |
|
• 10-1/8"x3-1/8"x7/16" base dimensions
• 5-1/4" distance inside of posts
• 5-3/8" height of posts
• Blade slot on top tier blade post
• Lower tier Dowel rods 2-1/4" above base
• Fits 2 Bowies and other large knives
• Cherry tone laminate finish
(Note: Stag Handle Bowie Knife HR-5000 & Boker 547 Bowie Knife shown are not included and are sold separately)
|
